Safety Switches And Controller

Product Details:

Our Bulletin 1794 FLEX™ I/O modules offer flexibility for your application with digital, analog, HART analog, and specialty I/O, with 4 - 32 points per module. You can mix and match digital and analog I/O with mounting and wiring options.

Product Details:

Magnetically Coded Non-contact Interlock Switches, with molded-in brackets and diminutive sizes, are extremely versatile and simple to install. For high-risk applications, the control unit is used with a single sensor to give a high-integrity system.

Product Details:

Safe and economical door monitoring with retaining force, Compact plastic housing, Rigid and mobile actuators, Available with M20 X 1.5 cable entry glands or Flexi Loop-compatible M12 plug connector (depending on variant), Slow-action switching elements with two contacts, High retaining force, IP 67 enclosure rating.

Product Details:

Safe door monitoring directly at the hinge, Standardized plastic housing, Stainless steel solid shaft with Ø 10 mm, 1 cable entry M16 x 1.5, Slow action switching element with up to 3 contacts, Adjustable switching point, IP67 enclosure rating.

Product Details:

Safe, non-contact position monitoring, Two OSSD safety outputs for direct connection of sensors to a single safety controller,Response range of up to 20 mm,LED status indicator, Up to performance level PL e / Cat. 4 (EN ISO 13849),Flexi Loop-compatible M12 plug connector

Product Details:

Compact, safe, and flexible, Response range of up to 14 mm,Small housing with flexible mounting options,Sensor activation possible from three sides,Four different actuators available,Universally coded, uniquely coded, and permanently coded sensors,PL e (EN ISO 13849), SIL3 (IEC 61508),Safe series connection of up to 30 sensors possible

Product Details:

Details:

• Sealed components resist water, dirt and are more accommodating to misalignment than mechanical switches
• Compact size makes it possible to conceal the switch
• Three housing styles are available for flat or 30 mm barrel-style mounting
• All models provide one normally open (NO) and one normally closed (NC) actuator contact
• Shifts in distance and alignment don't compromise sensing
• Coded magnets minimize the risk of intentional defeat
• Magnets with different polarizations add security
• For safety applications, switch must be used with Banner safety controllers or GM-FA-10J safety relay (or approved equivalent) 

Product Details:

Details:

• Four actuator types are available—lever, spindle-mount lever, plunger, and roller
• Mechanically coded actuators use two independent operating elements to minimize intentional tampering or defeat
• Rotating head and top or side engagement allows for eight different actuator positions
• One-piece switch eliminates need for alignment, engagement and risk of breakage of a separate actuator
• Design meets positive opening requirements for safety interlocks
• IEC IP65 switch housing rating increases to IEC IP67 with addition of a screw to the wiring chamber door

Product Details:

Details:

• Three types are available—load-bearing hinge, hinged lever and rotating hinge.
• Safety switching point can be set anywhere within 0-270° operating range on some styles.
• One-piece switch eliminates need for alignment, engagement and risk of breakage of a separate actuator.
• Design meets positive opening requirements for safety interlocks.

Product Details:

Details:

• Chieves Cat 4, PL e, or SIL CL 3 safety ratings with a single swicth deployed on a guard
• Mechanically coded actuators use two independent operating elements, making it difficult to bypass safety functions
• Rotating head requires little or no tools to adjust to one of four positions
• Can be used to prevent access to a hazard, ensure critical processes are not interrupted, or secure material and equipment from theft or tampering
• Once locked, a machine guard door will not open, eliminating an opportunity for nuisance trips, even if exposed to frequent impact or prolonged vibration
• IP67-rated safety devices that resist dust, dirt, and some exposure to water and similar environmental challenges
• Design meets positive opening requirements for safety interlocks
• Available in power-to-lock and power-to-unlock models with rigid and flexible in-line actuators and a wide range of solenoid voltages

Product Details:

Details:

• In-Series Diagnostics (ISD) provides detailed status and performance data from each sensor in a cascade chain which can be accessed with an HMI or similar device
• Single and cascade models available to protect one or multiple entry points
• On-sensor LED indicator provides at-a-glance status information
• Cascade up to 32 sensors in a series using a standard 4-wire cable with M12 connectors, T-adapters, and an end plug
• Tamper resistance to meet the needs of any application with unique, high, and low code models
• Achieves Cat 4, PL e, or SIL CL 3 safety ratings alone or in a cascade chain
• Rugged, IP69 construction withstands exposure to high-pressure, high-temperature washdown
• High tolerance (10 mm) to misalignment enables reliable performance in challenging industrial environments where machine vibration and impact are possible

Product Details:

Single-beam photoelectric safety switches comprise either self-testing senders and receivers or testable senders and receivers combined with an evaluation unit. They have long sensing ranges and come in a variety of types and sizes. They comply with Type 2 or Type 4 to EN 61496, and PL c or PL e to EN ISO 13849. Fields of application include robots, processing machinery, machining centers, palletizer systems, high-bay warehouses, and transfer lines.

Product Details:

Safety command devices from SICK ensure that dangerous movements are stopped safely or critical machine functions are put into operation. The portfolio contains four product groups: Emergency stop pushbuttons, reset pushbuttons and multiple pushbuttons, rope pull switches and enabling switches. This wide variety of products provides the right solutions for a range of applications.

Models:

• i150RP,
• E100,
• I100RP,
• ES21,
• ER21,
• ES11.

Product Details:

Product Details:

TLS-Z GD2 Guard Locking Switch is an interlock switch that has a uniquely coded RFID door sensor with inductive door position sensing technology. This switch can detect if an actuator key breaks or becomes separated from its door mounted position. 

Product Details:

Designed for partial body access guard doors. This switch combines microprocessor technology with an RFID coded actuator, and it features a locking bolt drive mechanism that locks only when the correct actuator is detected.

Product Details:

Intelligent and non-contact door monitoring with very effective tamper protection, Response range of up to 25 mm,Unique and universally-coded sensors up to enclosure rating IP 69K,Up to performance level PL e (EN ISO 13849), Two OSSD safety outputs, Reliable series connection of up to 30 sensors possible (depending on the variant), LED status indicator.

Product Details:

Simple and established non-contact door monitoring, Response range up to 7 mm, 2 or 3 contacts, Up to performance level PL e (EN ISO 13849), Sensors with plug connector or connected cable, Flexi Loop-compatible M12 plug connector (depending on variant)

Product Details:

Safe and economical door monitoring with high locking force,Narrow plastic housing,Rigid or mobile actuators,Available with M20 X 1.5 cable entry glands or Flexi Loop-compatible M12 plug connector (depending on variant),Power to lock or power to release variants,Lock and door monitoring,IP 67 enclosure rating.

Product Details:

Details:

• Compact metal style switches are designed for limited space requirements in rugged environments
• SI-LM40MKH models are available with rigid and flexible in-line actuators.
• SI-LM40MKV models have a trumpet-style actuator.
• Rotating head requires little or no tools to adjust to four positions.
• Design meets positive opening requirements for safety interlocks.

Product Details:

 839E Flow Switches monitor and display liquid media flow rate from 0.03 to 3 m/sec (0.1 to 9.84 ft/sec). This sensor measures both flow and temperature and is available with two different probe insertion lengths.